Cars & Parts Market

Are you a VDC member that has something rare or unique for sale? Perhaps you are looking for something in particular? Either way you can post you ad here. (Note: You will need to be logged in)

Advertisments will be removed after three months unless extension is required.

Disclaimer: The Vintage Drivers Club is not liable for any errors and or omissions in advertisements listed on this site. 

Any advertisements on the site are not for commercial purpose and do not necessarily imply endorsement by the Vintage Drivers Club.

<< First  < Prev   1   2   Next >  Last >> 
  • 11 May 2018 3:21 PM | Anonymous member (Administrator)

    Woodfast heavy duty bandsaw, all cast iron, tilt table, all ball bearing guides 350mm throat, 2wheels fitted for easy moving....$300

    Ryobi 10” bench saw, raise lower, tilt, Black & Decker router attached,separate motor driving a 330mm sanding disk also built onto the unit,a small planer is also mounted but needs an extension from the sander  motor to work...$150

    Brass extrusion 3600 mm long, outside dimension 25mm x 12mm, slot 6mm, could be opened out more, ideal to make windscreen frame $60

    Contact Aub Smith   Tel: 9583 3960

  • 11 May 2018 3:20 PM | Anonymous member (Administrator)


    Pair of early 20's cowl lamps. Excellent condition. $80 pair


    Reverse idler gear (13 teeth) applicable up to October 1922  $30

    Countershaft drive gear up to October 1922  Good condition $50

    Dufor NOS 7/8" Dia King pins and bushes 1927/28  $150

    Contact Rob Kirby   Tel: 03 9439 3979

  • 11 May 2018 3:18 PM | Anonymous member (Administrator)

    5 New wrapped Lucas whitewall tyres, size 6.00-20 surplus to my needs They must be at least 20 years old. 

    Price- $200 each ONO

    Contact Nicholas Gibbs   Email:

  • 11 May 2018 3:17 PM | Anonymous member (Administrator)

    Piston Rings   -  Compression cast iron and segmented oil rings from 2 ¼” to 4 ¼” various widths in sets and individual rings.

    Contact  Ralph Provan Tel, 57921375

  • 20 Apr 2018 5:44 PM | Anonymous member (Administrator)

    Dodge 4 1924/25 lower windscreen frame, good condition $100

    Contact Rob Kirby   94393979

  • 20 Apr 2018 5:36 PM | Anonymous member (Administrator)

    1 windscreen, 1 windscreen frame, 1 dash panel (from unknown make)

    If you can identify them for me please let me know or if you want them please make an offer.
    Call Colin 0419502782     


  • 20 Apr 2018 5:34 PM | Anonymous member (Administrator)

    Tandem Trailer - A heavy duty tandem trailer in very good condition with both electric and ride-on brakes, near new 6 tyres including two mounted spares. Easily opening spring loaded ramps to drive on, front wind/stone deflector, electric winch with near new battery, lights and registered. The trailer has lived indoors all its life.

    The trailer has been specially built for a large and heavy vintage or veteran car. I easily drive on my 1930 Graham, Plymouth or the Hupmobile, both of which are very heavy and large cars with the wind deflector contoured for these cars to "hide" behind it.

    The trailer tows very easily behind a 4x4, is very stable on the road and is great for long trips. It has filled in floor so can also carry a large amount of spares etc. as well. Asking $6,800 ono. Please call Paul on 0412 534131

  • 20 Apr 2018 5:30 PM | Anonymous member (Administrator)

    Black, lockable, vinyl covered trunk. Made from galvanised sheet.

    Width:   765mm/30”, Depth:   335mm/13”, Height:  270mm/10.5”

    Price: $175.00 

    Contact Ross Ansell  Mob: 0429 173 223     


  • 08 Nov 2017 2:49 PM | Anonymous member (Administrator)

    1926 Nash lite 6 engine complete , has had a rebuild hi comp pistons c/w gearbox @$1800 

    1934 Chev complete rear axle /Diff c/w wire wheels brake drums etc $350.

     Denis Ph: 0407533342

<< First  < Prev   1   2   Next >  Last >> 

Website Management by GroundStation

Powered by Wild Apricot Membership Software